Plastazote (LD15) Polyethylene Foam

Advanced Seals & Gaskets Ltd manufacture a diverse range of Plastazote Polyethylene Foam products in densities including 15Kg/m³, 18Kg/m³, 24Kg/m³, 33Kg/m³, 45Kg/m³, 60Kg/m³, etc., and colours including black, white, blue, red, yellow and green to name but a few.

Plastazote® is a Closed Cell Expanded Low Density Polyethylene Foam that is blown with Nitrogen gas, inducing nitrogen cells within the polyethylene foam, the cells are not open or connected in any way giving it's excellent sealing capabilities. The material is generally manufactured in block form, which can be joined together to form continuous rolls and split to thicknesses starting at 1.5mm. Advanced Seals & Gaskets Ltd are able to manufacture a wide variety of products from Plastazote LD15 Polyethylene Foam including:

  • Sheet
  • Rolls
  • Strip
  • Coils
  • Gaskets
  • Pads
  • Washers
  • CNC cut parts
  • Seals
  • Fabrications

All of the above can be manufactured in either plain or self-adhesive backed, peel-able liner on one or both sides. Plastazote LD15 Polyethylene Foam is an extremely resilient, closed-cell, cross-linked foam that is lightweight, odourless and non-toxic. It is a tough, durable material that has a range of uses including case inserts, floats and buoyancy aids, sleeping mats, show insoles, pipe insulation, anti-vibration pads and much more.

Key Characteristics of Plastazote (LD15) Polyethylene Foam:

  • Impervious to liquids, gases and particles
  • Resistance to most oils, solvents, acids and alkalis
  • UV stable
  • Ozone resistant
  • Good compression recovery
  • Excellent thermal properties
Plastazote (Ld15) Polyethylene Foam

Help and guidance

If you would like to speak to a representative to discuss your specific application or requirements please call our sales office direct on 01384 469100, alternatively you can send an E-mail. Simply click on the link and forward us your details along with your question and we will contact you immediately.

Quality of our Plastazote (LD15) Polyethylene Foam

The quality of service and the products manufactured from Plastazote (LD15) Polyethylene Foam is controlled by our Quality Management Systems which is certified to ISO 9001.

Call now for sample requests or further help.

Material Enquiry

For information on Plastazote (LD15) Polyethylene Foam please complete the following quick enquiry or call us on +44(0)1384 252555.

    Material Specification

    Full technical data can be supplied upon request,
    or downloaded from our online portal.