Solid Rubber is a common phrase which encompasses a whole family of materials. These include:
- Commercial rubber
- Neoprene rubber
- Natural rubber
- Nitrile rubber
- EPDM rubber
- Viton rubber
- Shot-blast rubber
- Solid Polyurethane
- Butyl Rubber
- Abrasive Resistant Solid Rubber
- BS2751 Solid Rubber
- BS1154 Solid Rubber
- BS2752 Solid Rubber
- Food Quality Solid Natural Rubber
- Food Quality Solid Neoprene Rubber
- Food Quality Solid Nitrile Rubber
- Hypalon Solid Rubber
- Solid Commercial Insertion Rubber
- Solid Neoprene Insertion Rubber
- Solid Nitrile Insertion Rubber
- Solid Polyurethane Rubber
- Solid Slicone Rubber
- WRAS Solid EPDM Rubber
Solid Rubber Formats
All of the above material grades are manufactured in roll format pre-manufactured thicknesses.
Most of the Solid Rubbers are manufactured in continuous rolls with sizes of 1.4mtrs wide x 10mtrs long with the exception of Viton and silicone which are manufactured in rolls 1.2mtrs x 10mtrs. We can supply in continuous rolls or supply part rolls (subject to grade chosen and may be subject to cutting charges)
Thickness of Solid Rubber
The following thicknesses are available as standard: 0.5mm, 0.8mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 4.5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 20mm and 25mm. Other thicknesses are available upon request but may be subject to minimum order quantity.
Stock of Solid Rubber
Here at Advanced Seals & Gaskets Ltd we stock all of the above grades and manufacture a wide range of products from the raw materials including :
- Rubber washers
- Rubber gaskets
- Rubber strip
- Rubber sheet
- Rubber pads
- Rubber fabrications
- Rubber mouldings
- Rubber extrusions
Any of the above items can be supplied with a self-adhesive backing if preferred.
Special grades of Solid Rubber
Solid Rubber is also available in grades such as BS2752 Neoprene, BS2751 Nitrile, BS1154 Natural and WRAS or WRC approved EPDM. These grades may be subject to minimum order quantity.
We are able to offer Solid Rubber in various shore hardness from 40 shore to 80 shore with 40 shore being the softest. Please see the chart below for a pictorial example on shore hardness.
Quality of our Solid Rubber
The products and services provided by Advanced Seals & Gaskets Ltd are continuously quality controlled at ALL stages of processing. To help ensure product quality at all times we run a fully documented Quality Management System which is certified to ISO 9001.
Help with Solid Rubber
If you would like to speak with a representative to discuss your specific application or requirements please call our sales office direct on 01384 469100, alternatively, you can send an E-mail. Simply click on the link and forward us your details along with your question and we will contact you immediately.
For more details use the form below or contact us on 01384 469100.