Home > Cork > Nitrile Bonded Cork

Nitrile Bonded Cork

Advanced Seals & Gaskets Ltd manufacture a diverse range of Nitrile Bonded Cork products.

Nitrile cork is made from cork granules which are then bonded together using a nitrile rubber matrix. The material is brown in colour with black pigments of rubber and is either produced in continuous rolls at 1000mm wide or if preferred in 1-meter square sheets depending upon the thickness.  There is a range of thicknesses available from 0.8mm to 25mm.

Advanced Seals & Gaskets Ltd are able to manufacture a wide variety of products from Nitrile Bonded Cork including:

All of the above can be manufactured in either plain or self adhesive backed, peel-able liner on one or both sides.  Nitrile Cork is an economical material that is highly compressible, suitable for high and low bolt pressures and has good flexibility and is also very resilient. All of these attributes make Nitrile Bonded Cork an excellent general purpose gasket material that will perform well perform well in such applications as sump seals, crankcase covers, inspection door seals, valve covers, electrical transformers and switchgear applications.  Cork can also be used for wider applications such as anti-vibration, clutch plates, and polishing wheels.

Key Characteristics of Nitrile Bonded Cork:

  • excellent working temperatures of -20°c to +120°c
  • good resistance to fuels, grease and oils
  • flexible
  • highly compressible

Quality of our Nitrile Bonded Cork

The quality of the products and services manufactured from Neoprene Bonded Cork is controlled by our Quality Management System which is certified to ISO 9001.

For more details use the form below or contact us on 01384 469100.

Advanced Seals & Gaskets Ltd | Get in touch to discuss your specific requirements

Contact Us